BCMSZ - ZYNOLYTE 1000F,HI-TEMP SPRAY PAINT

  • MSDS: BCMSZ
  • Manufacturer: ZYNOLYTE PRODUCTS CO
  • Product Name: ZYNOLYTE 1000F,HI-TEMP SPRAY PAINT
  • National Stock Number: 8010-00N006429
Product Identification

Product ID:ZYNOLYTE 1000F,HI-TEMP SPRAY PAINT
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006429
MSDS Number: BCMSZ

Responsible Party
ZYNOLYTE PRODUCTS CO

Emergency Phone: 213-604-1333

Cage: 25461

Contractor
ZYNOLYTE PRODUCTS CO
6244 CARSON, CA 90749 US

Telephone: 310-513-0700

Cage: 25461

Ingredients

CHLORINATED HYDROCARBON

Fraction By Weight: 10%

ACGIH TLV: 100 PPM (MFR)


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 40%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


AROMATIC HYDROCARBON

Fraction By Weight: 5-9%

ACGIH TLV: 200 PPM (MFR)


ALIPHATIC HYDROCARBON

Fraction By Weight: 5-25%

ACGIH TLV: 500 PPM (MFR)


ISOBUTANE/PROPANE PROPELLANT

Fraction By Weight: 30%

Hazards

Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CALL PHYSICIAN. INHALATION:
REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CONSULT PHYSICIAN.

Fire Fighting

Flash Point:<20F/-6C
Extinguishing Media:FOAM,CO*2,DRY CHEM
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS WILL EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SECURE SOURCES OF IGNITION,CONTAIN SPILL,
PICKUP WITH ABSORBENT & NON SPARKING TOOLS. VENTILATE AREA

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT
SMOKE, ARK WELD, FLAME CUT OR BRAZE IN AREA OF USE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Vapor Density:>1
Spec Gravity:1.09
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:85

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STORAGE ABOVE 120F/48C
Hazardous Decomposition Products:HCL,PHOSGENE

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.